Home Page
     
    X
    Telecom Testing and Certification

    Wired, Radio and terminal equipment is regulated by standards governed by national telecommunication authorities.

    USA
    The US Administrative Council for Terminal Attachment is an open organization that adopts standards and handles equipment registration. The requirements applicable to analog, xDSL, T1 telecom terminal equipment are defined in FCC Part 68 and ANSI/TIA-968-A standards.

    Canada
    Telecom terminal equipment in Canada must be certified by the Industry Canada according to the CS-03 standard.Europe

    In Europe the standards are set by the ETSI (European Standards Institute). These standards include TBR 4 (E1 ISDN PRI), TBR 12 (Unframed E1), TBR 13 (Framed E1), ETS 203 021 (analog equipment), TBR 21, TBR 38 (acoustic analog telephones).
    Manufacturer declaration of conformity is sufficient for the European CE mark.

    Japan
    In Japan, telecom terminal equipment must be certified by JATE according to requirement defined in Analog Terminals and Digital Terminals.

    Australia
    In Australia, the Australian Communication and Media Authority (ACMA) certifies telecom terminal equipment through A-tick procedure based on compliance with AS/ASIF S002, S003, S004, S016, S041, S043.2 standards.

    Israel
    Hermon Laboratories is approved by the Israeli Ministry of Communication (MoC) for testing and certification application of telecom terminal products.
    Hermon Laboratories provides complete turnkey testing and certification solutions for telecom products in the above-mentioned and other countries.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    Radio tests

    Why Do I Need Radio Compliance?
    Most Radio Frequency (RF) telecommunications services are globally regulated by national laws (FCC, R&TTE Directive, IC etc.). These laws ensure that radio communication products use the allowed radio frequency spectrum with minimal interference with other radio services or equipment. These laws also address the potential safety hazards of human exposure to RF energy.

    Wireless testing and certification
    Hermon Laboratories provides worldwide approvals for Licensed and Unlicensed wireless products such as:
    • FCC grants (USA) - per Part 15, 21, 22, 24, 27, 95 and 101
    • Industry Canada –RSS certificates 119 and 201
    • CE mark (Europe) In accordance with the R&TTE (Radio & Telecommunications Terminal Equipment Directive).
    • C-Tick mark (Australia/NZ) – AS/NZS 4268, 4295, 45768.1, 4768.2 and 4771
    • MIC (Japan) Certification of Radio equipment

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    EMC Test - Radiated Emissions Test

    Why do I need EMC Compliance?

    Compliance with Electro Magnetic Compatibility (EMC) standards is required by national laws and demanded by industries and consumers.

    EMC tests the ability of devices to withstand interference from other electrical or electronic equipment and environments and verify that its emission cannot cause harmful interference with other electrical or electronic equipment.

    EMC is not just a regulatory requirement, EMC testing may be requested by your customers and occasionally equipment manufacturers may self- impose reliability standards for their products. Whatever the reason all equipment should be designed to function properly in its intended electromagnetic environment.

    In order to achieve this objective, the need for a professional team of EMC compliance experts combined with best testing facilities is essential to the EMC testing and approval process.

    EMC compliance is required by law from practically all countries around the world such as FCC (USA), IC (Canada), CE Mark (European Union), etc.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    EMC Test - Immunity tests

    Why do I need EMC Compliance?

    Compliance with Electro Magnetic Compatibility (EMC) standards is required by national laws and demanded by industries and consumers.

    EMC tests the ability of devices to withstand interference from other electrical or electronic equipment and environments and verify that its emission cannot cause harmful interference with other electrical or electronic equipment.

    EMC is not just a regulatory requirement, EMC testing may be requested by your customers and occasionally equipment manufacturers may self- impose reliability standards for their products. Whatever the reason all equipment should be designed to function properly in its intended electromagnetic environment.

    In order to achieve this objective, the need for a professional team of EMC compliance experts combined with best testing facilities is essential to the EMC testing and approval process.

    EMC compliance is required by law from practically all countries around the world such as FCC (USA), IC (Canada), CE Mark (European Union), etc.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    Product Safety at Hermon Laboratories

    Most electronic and electrical products are required to comply with product safety standards under national laws and directives such as the European LVD Directive 73/23/EEC, OSHA product safety regulations, etc. Hermon Laboratories provides complete turnkey approval solutions for many countries around the world. Hermon Laboratories works in cooperation with worldwide organizations to provide certification marks such as, UL, TUV, Intertek, MET labs and CSA as well as recognized national and international approvals including CE, CB, CCC, GOST, GS mark and more.

    Experienced professional team Offering a highly experienced product safety team, Hermon Laboratories provides proactive support throughout the entire certification process. The process includes the definition of target market requirements, selection of the most suitable certification route, product evaluation, certified component selection, project application and management with certification bodies.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    Environmental Testing

    Environmental standards address the exposure of products to various conditions such as temperature, humidity, altitude, mechanical shock, vibration substances ingress and contamination. Environmental testing reproduces the conditions that a product is expected to endure during transportation, storage and operation. Environmental testing is also carried out to prove the quality and reliability of a product in order to verify the manufacturer's claims regarding operational limits, storage requirements, and stability during transportation in order to determine realistic warranty terms.

    Comprehensive range of environmental testing under one roof.

    Hermon Laboratories provides environmental testing and support services according to worldwide standards, addressing the needs of various vertical markets including Military, Medical, Telecom and ITE.
    Hermon Laboratories offers:
    • Military and Commercial testing
    • Highly specialized team of test engineers and experts
    • HALT & HASS
    • State-of-the-art testing facilities and equipment – Link to Env. Facilities
    • Combined multiple simulations
    • Automatic report generation within 48 hours
    • Vast array of standards supported

    Helping you to approve your products on time!

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    EMC Test - Immunity tests

    Why do I need EMC Compliance?

    Compliance with Electro Magnetic Compatibility (EMC) standards is required by national laws and demanded by industries and consumers.

    EMC tests the ability of devices to withstand interference from other electrical or electronic equipment and environments and verify that its emission cannot cause harmful interference with other electrical or electronic equipment.

    EMC is not just a regulatory requirement, EMC testing may be requested by your customers and occasionally equipment manufacturers may self- impose reliability standards for their products. Whatever the reason all equipment should be designed to function properly in its intended electromagnetic environment.

    In order to achieve this objective, the need for a professional team of EMC compliance experts combined with best testing facilities is essential to the EMC testing and approval process.

    EMC compliance is required by law from practically all countries around the world such as FCC (USA), IC (Canada), CE Mark (European Union), etc.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

    X
    Product Safety at Hermon Laboratories

    Most electronic and electrical products are required to comply with product safety standards under national laws and directives such as the European LVD Directive 73/23/EEC, OSHA product safety regulations, etc. Hermon Laboratories provides complete turnkey approval solutions for many countries around the world. Hermon Laboratories works in cooperation with worldwide organizations to provide certification marks such as, UL, TUV, Intertek, MET labs and CSA as well as recognized national and international approvals including CE, CB, CCC, GOST, GS mark and more.

    Experienced professional team Offering a highly experienced product safety team, Hermon Laboratories provides proactive support throughout the entire certification process. The process includes the definition of target market requirements, selection of the most suitable certification route, product evaluation, certified component selection, project application and management with certification bodies.

    For more information about compliance needs for global market access please Contact Hermon Laboratories to assist you.

     
    SERVICES
    EMC EMC
    Radio Radio
    Product Safety Product Safety
    Environmental Environmental
    Telecom Telecom
    Calibration Calibration
    HALT & HASS HALT & HASS
    International Approvals International Approvals
    Support Support
    Import permit to Israel Import permit to Israel
    Customer Training Customer Training
    Request a Quote
    Ask The Experts
     
    Corporate Home | Services Home | Products Home | Sitemap | Feedback | Terms & Conditions
    Copyright @ 2009 Hermon Laboratories Ltd. All Rights Reserved.