|
|
|
 |
|
| |
| Home > TCA 8200 Telecom Conformance Analyzer > Specifications > Test Interfaces (front panel) |
| |
| TCA 8200 |
| TELECOM CONFORMANCE ANALYZER |
| SPECIFICATIONS |
| Test Interfaces (front panel) |
| 1544 kbit/s interface (opt. T1) |
Tx and Rx connectors............................................... 3-pin Siemens jack (4 mm banana compatible), 100O, balanced
Line Coding................................................................ B8ZS, AMI
Framing Format.......................................................... ESF (193E), D4 (193S), Unframed |
| Clock Input / Output (opt. E1 or T1) |
Input / Output 1.544 MHz or 2.048 MHz TTL signal, depending on test configuration
Connectors............................................................... BNC female, unbalanced |
| 2048 kbit/s interface (opt. E1) |
Tx and Rx connectors.............................................. 3-pin Siemens jack (4 mm banana compatible), 120O, balanced BNC female, 75O, unbalanced
Line Coding............................................................... HDB3, AMI
Framing Format......................................................... CCS & CRC4, CAS & CRC4, CCS, CAS, Unframed
Protocol Testing........................................................ ISDN PRI Layer 2 and Layer 3 testing according to ETSI TBR 4 (opt. L23) |
| Analog PSTN interface (opt. ALG ) |
Two Analog 2-wire test ports with loop simulation and programmable ring and progress tone generator (CH A, CH B), External termination (Zref) input, External series (feed) resistance input, Speaker for audio monitoring with volume control (CH A only), Off-hook LED indicator
Connectors .............................................................. 3-pin Siemens jack (4 mm banana compatible)
Loop simulation (FXS & FXO)
DC power supply
Loop feed channel
Output Voltage......................................................... 0 - 110 Vdc
Current Limit............................................................. 0 - 200 mA
Voltage resolution.................................................... 30 mV
Voltage accuracy.................................................... 200 mV
Polarity switching time............................................. < 0.2 ms
DC resistance test channel
Output voltage......................................................... 0 - 500 Vdc
Maximum current..................................................... 10 mA
Voltage resolution .................................................. 0.2 V
Voltage accuracy .................................................. 0.4 V
Series resistance
Range .................................................................... 0 - 300 kO or external
Resolution .............................................................. 5O or 10O depending on test configuration
Terminations (Zref) ................................................ Variable according to the supported standards, external or software simulated
R1 + (R2 II C2) for measured impedance calculation
Artificial line network ............................................. Variable according to the supported standards
Ring generator
Programmable frequency, level, on/off duration, cadence
Output voltage ...................................................... 0 - 150 Vrms
Output power........................................................ 22.5 W maximum
Frequency............................................................. 10 - 100 Hz
Voltage resolution ................................................. 0.2 V
Voltage accuracy.................................................. 0.5 V
Progress tone generator
Programmable frequency, level, on/off duration, cadence |
| Acoustic interface (opt. ACU -INT ) |
Audio frequency generator output
Connector .......................................................................... BNC female
Connects to external mouth simulator
Measurement input
Connector .......................................................................... LEMO type female (7-pin)
Frequency range ............................................................... 10 Hz - 24 kHz
Connects to external ear simulator
Second measurement input (opt. ACU -INT 2)
Connector .......................................................................... LEMO type female (7-pin)
Connects to external ear simulator |
| xDSL interface (opt. DSL) |
| Testing xDSL electrical characteristics and transmit power provided through Analog PSTN and 1544 kbit/s interfaces. |
|
|
| NOTES: |
- Excluding: High voltage (surges, overvoltage protection, leakage current), EMC, safety, environmental tests
- See xDSL electrical characteristics and transmit power below, for supported tests
- opt. L23 is required for Layer 2 and 3 testing
- Contact Hermon Laboratories for other available standards
- Some standards are optional - please consult Hermon Laboratories
|
| Back to top |
|
|
|
|
|
| Copyright @ 2010 Hermon Laboratories Ltd. All Rights Reserved. |
| |
|